RIGIPS® PRO Fire+ Plasterboard

12,5 mm thick fire-resistant gypsum board type DF.

Controlled density gypsum plasterboard for use in construction for sheathing in drywall systems and prefabrication of various building components.

Advantages of RIGIPS® PRO Fire+ boards:

• Easier navigation through the disc. The dots in the middle of the board make it easier to install the boards with profile spacing of 60 cm and the dotted lines placed at 1/3 and 2/3 of the board make it easier to install the boards with profile spacing of 40 cm.
• Low PRO edge depth.
• Maximum strength of joint between plasterboards thanks to optimum placement of joint tape (less risk of cracks).
• 1-fold structural mudding of the joint between plasterboards with the use of a joint tape, due to imperceptible shrinkage of the binding and drying mass (low thickness of joint compound).
• Reduced consumption of joint compound needed to make a joint between plasterboards, resulting in savings in the cost of purchasing materials.
• Shorter time needed to achieve a ready joint due to faster drying of a thin layer of joint compound.
• Freedom of plasterboard installation with sheet metal screws (screws even 10 mm from the board edge).
• Easy control of the planes formed at the joint between two plasterboards.
• Controlled density of the plasterboard core.

Application:

• Wall coverings
• Partition walls
• Suspended ceilings
• Ceiling claddings
• Attic buildings

Particularly in rooms with increased requirements for fire resistance and high temperatures.

Technical data: